HOSE CLAMP AUTOMATION

Picture1 (4)
Picture3 (3)
Picture2 (2)

HOSE CLAMP ASSEMBLY

  • Automatic screw loading and screw tightening
  • Hosing crimping
  • 17 different size handled (min- Ø30 to max-Ø100)
  • Easy changeover
  • Precise Assembly
  • Greasing Provision
     
Picture4 (2)

END LOOP FORMING AND LASER MARKING MACHINE

Features

  • Manual loading & auto unloading by pneumatic actuators.
  • Servo based slider mechanism for strip length adjustment.
  • Motorised loop forming unit from both side.
  • Pneumatic based strip holding unit.
  • Servo based end length adjustment unit.
  • Auto ejection by pneumatic system
  • Safety canopy
  • Working air pressure 5-6 bar.
  • PLC base control panel used with HMI.
  • Rigid structure robust structure.
  • Cycle time:- 12-15 parts/min.
picture7 (4) (1)

END BENDING AND ROLLING AUTOMATION

  • Manual loading of band.
  • Adjustable walking beam for sliding of band to punching station to Rolling Station
  • Hydro pneumatic cylinder for punching station in which right side is fixed which is t-nut side.
  • Second punching station which sliding with help of lead screw mechanism according to length if band.
  • 4.8 tone force is applied for punching.
  • Walking beam is used again for feeding to rolling station.
  • With pneumatic cylinder & follower rolling if band is done.
  • Adjustable die is done according to families with lead screw mechanism.
  • PLC base control panel used with HIM.
  • Rigid & robust structure.
  • Cycle time :- 12-14parts per min.